Derbyshire Tiling Specialists logo

TILE REPAIRS · DERBY & DERBYSHIRE

Tile repairs Derby

Repair or replacement of broken, cracked and chipped tiles across Derby and Derbyshire, on floors and walls, matched as closely as possible to what you already have.

  • Part of Derbyshire Specialists Group
  • £10m public liability insurance
  • Floor and wall tiles
  • Homes and businesses
Cracked terracotta floor tile with a broken corner among intact tiles
0% APR finance available, subject to status

Tiling repairs

Broken or cracked tiles can spoil the look of any room, whether it's a bathroom, kitchen or living space. Of more concern is the risk of an accident from a broken tile that isn't dealt with, especially if the break is in a floor tile.

As well as installing new tiling, Derbyshire Tiling Specialists repair and replace damaged tiles. Often this means replacing a tile or a section of tiles, but until one of our professional tilers has assessed the damage we can't be sure which option will give the best long-term solution. That can also be influenced by the availability of suitable replacement tiles.

If you have an issue with your existing tiles, don't hesitate to get in touch.

Tile repairs we handle

  • Hairline cracks filled and blended in
  • Chipped edges filled, shaped and sealed
  • Broken tiles cut out and replaced
  • Dislodged tiles replaced on fresh adhesive
  • Grout matched to the existing colour

Tile replacement Derby

Tile damage can happen for many reasons, often linked to the type of room and the conditions the tiles are exposed to. The most frequent causes of broken and cracked tiles are:

Impact damage

Dropping heavy objects onto tiled surfaces, particularly floors in kitchens and bathrooms, can chip, crack or completely shatter a tile.

Substrate movement

Structural shifts in older homes, or a new home or extension that hasn't finished settling, move the floor or walls beneath and can crack tiles or pop them out of place.

Poor installation

Patchy adhesive coverage, an uneven substrate or poor grouting can leave tiles loose or cracked over time.

Temperature changes

Kitchens and bathrooms see big swings in temperature, which make tiles expand and contract and can lead to cracks.

Moisture getting in

In bathrooms, water can seep behind tiles once the grout is damaged, loosening and cracking them. Repairing failing grout early helps prevent it.

Heavy foot traffic

Hallways, kitchens and entrances get constant use, making their tiles vulnerable to wear and eventual breakage.

Why not to leave damaged tiles

Leaving damaged tiles unrepaired can lead to several problems:

  • Safety hazards: sharp edges on cracked tiles can cause injuries, especially where children or pets are about.
  • Water getting in: in wet rooms like bathrooms and kitchens, water can get behind cracked tiles, causing damp, mould and damage to the subfloor.
  • Further damage: one damaged tile can weaken the tiles around it, leading to a domino effect of further cracks.
  • Lower property value: visibly damaged tiles make a home less appealing and can affect its market value.
Tiler using a hammer and chisel to remove broken wall tiles before replacing them

Floor tile repair near me

If you live in Derby or further afield in Derbyshire and are looking for floor tile repair or tile replacement near you, we come to you, so we're ideal. Get in touch today.

Tiling repair or replacement in Derby

Whether to repair or replace a broken tile depends on the extent of the damage, whether matching tiles are available and the overall condition of the tiled area. Our professional tiler first inspects the damage: small chips and hairline cracks can often be repaired, while larger fractures or dislodged tiles usually need replacing.

For repairs, depending on the tile, he may use a combination of epoxy resin, tile filler and colour-matched sealants. Direct replacements depend largely on sourcing matching tiles and grout. Many homeowners keep the odd spare tile after a new installation for exactly this reason; if not, or if more tiles have to come out, a fingers-crossed moment with the tile supplier usually follows. Some tile ranges are timeless and suppliers stock them for many years, while others are only held for a short time while they are on trend.

If replacement is the only option and the original tile can't be found, one solution is to use similar-sized tiles that are deliberately different, turning the repair into a feature. Depending on where the damage is, the end result is often preferred to the original layout.

If our tiler is carrying out a repair

1

Clean the tile

Dust and loose debris are removed from the damaged area.

2

Fill cracks

Epoxy or a specialist tile filler is applied to hairline cracks, carefully smoothed and left to cure.

3

Repair chipped edges

For minor chips, a pigmented filler is applied, shaped and sealed for durability.

4

Polish and seal

Once dry, the repaired area is lightly polished to blend in with the surrounding tiles.

If a tile needs replacing

1

Remove the damaged tile

The grout is cleared, then the broken tile is carefully chipped out with a hammer and chisel without damaging the tiles around it.

2

Clean the substrate

All old adhesive and debris are removed, which is critical so the replacement tile is held securely.

3

Fit the new tile

Fresh adhesive is applied and the replacement tile is set in place, aligned and spaced to match.

4

Grout and seal

Once the adhesive sets, new grout is applied, matched to the existing grout colour.

Stopping it happening again

Our tilers are happy to put your tiles right, and they are just as keen to make sure the breakage doesn't happen again. Different rooms bring different challenges for tile repair and replacement:

Bathrooms

Water damage is the main concern, so our tiler uses waterproof grouts and sealants to keep the area moisture resistant.

Kitchens

Heat-resistant adhesives and grout are essential, especially near cooking areas. We check whether the damage came from thermal expansion and choose materials to suit.

Living rooms and hallways

These areas often use large-format floor tiles or decorative patterns, so keeping the look consistent when replacing tiles is crucial.

Attempting DIY tile repairs can cause further damage if they aren't done correctly. Our professional tiler brings specialist knowledge of adhesives, grouting and substrate preparation for a seamless, durable result, and can suggest a remedy if you don't have spare tiles. If you'd like to understand the process first, read our expert guide to repairing ceramic tiles.

Tile repair costs

Every repair is different, so we price each one on the damage, the number of tiles involved and whether matching tiles can be found. As a guide, skilled tilers in Derby typically charge £25–£40 per hour, according to our guide to tiling costs in Derby.

Send a photo of the damaged tiles, ideally with a spare tile or the tile name if you have it, and we'll come back with a fixed quote.

Tile repair questions

We provide tiling services for businesses and homes, focusing on a quality finish every time. We assess and repair broken tiles without using jargon, so you know exactly why we have chosen the repair approach and what the process will involve. As part of Derbyshire Specialists Group we can combine specialist trades for a perfect finish on other home improvement projects too. You have electricians, joiners and plumbers on hand, but only one invoice and one guarantee for all the work. Simple and stress free. Why would you choose anyone else?

Yes, a single tile can be replaced without damaging or dislodging the tiles around it, but it takes care and the right tools. First the grout around the damaged tile is removed with a grout saw or a rotary tool, which creates enough space to avoid damaging the neighbouring tiles. The damaged tile is then gently cracked with a hammer and chisel, working from the centre out to the edges to keep pressure off the surrounding tiles. Once the pieces are out, the area is cleaned thoroughly and the old adhesive removed to give a smooth surface for the new tile. During this process we also check the adhesion of the tiles next to it, so they are unlikely to need replacing soon.

Finding an exact match for the damaged tile can be difficult, especially if the design is dated or discontinued, and even minor differences in colour or texture can be noticeable. Removing the damaged tile without affecting its neighbours takes precision, as poor technique can cause more breakages. Once it is out, the surface needs careful cleaning and levelling so the new tile sits flush. Each step needs attention to detail so the repair blends in with the existing tiles.

It depends on the damage, how many tiles are involved and whether matching tiles are available. As a guide, skilled tilers in Derby typically charge £25–£40 per hour. Send us a photo of the damage and we'll give you a fixed quote.

Our other tiling services

Cracked, stained or crumbling grout restored and sealed.

When a repair isn't enough, a full bathroom retile.

New splashbacks, walls and kitchen floors.

Floors relaid with proper preparation underneath.

A deliberate contrast that can hide an old repair.

Which tiles suit floors, walls and wet rooms.

Get a tile repair quote

Send a photo of the damaged tiles and we'll come back with a clear quote within 24 business hours.

Business Hours

Mon - Sat7:30 am – 6:00 pm
SunClosed

© 2026 All Rights Reserved | Derbyshire Tiling Specialists - part of Derbyshire Specialists Group

Derbyshire Tiling Specialists: Locations Served

Derbyshire Specialists Group Ltd is an Introducer Appointed Representative of Ideal Sales Solutions Ltd, t/a Ideal4Finance. Ideal Sales Solutions Ltd is a credit broker and not a lender (FRN 703401). Finance available subject to status. The rate offered is always provisional and will depend upon your personal circumstances, the loan amount and the term.

Part of Derbyshire Specialists Group since 2022 · £10m public liability insurance through Derbyshire Specialists Group · Find us on Google · Privacy and cookie policy